Our MDF shelves are made to order in your exact size, using 18mm thick MDF. Each shelf includes everything you need to fit it:
- 1 x MDF shelf (cut to your width and depth)
- 3 x wall battens (for the left, right and back walls)
- Wall plugs and screws for fitting
These shelves are ideal for cupboards, alcoves, under-stairs storage, and utility spaces. The MDF is smooth and easy to paint or seal, giving you the option to finish it your way.
- 18mm MDF for strength and stability
- Clean cut edges, ready to paint
- Free UK delivery
Frequently Asked Questions
Q: I have stud walls, are these shelves suitable?
Q: I have stud walls, are these shelves suitable?
A: The screws and wall plugs we provide are suitable for drywall but for added strength we recommend using gripfill on the support battens when fitting.
Q: Can I screw directly into MDF?
Q: Can I screw directly into MDF?
Yes, but it is best to pre-drill pilot holes to avoid splitting the material.
Our shelves arrive with cut-to-size wall battens with pre-drilled holes, so you won't need to screw into the MDF itself during installation.
Q: My walls are uneven, what size should I order?
Q: My walls are uneven, what size should I order?
A: The support battens are each 20mm thick, which would allow you to order to your smallest width if the discrepancy was a few mm. If there is a significant disproportion, the carpenter can make the shelves to fit these measurements. For this we ask you order to your largest measurement and specify measurements in the personalisation (eg; 91.5cm at the front 93.5cm at the back) or if you are unsure, please do message.
Q: I’ve measured my space, should I order to the exact size?
Q: I’ve measured my space, should I order to the exact size?
A: We recommend taking off 5mm (0.5cm) from your width. This allows for any discrepancies in the wall and makes fitting easier.
Q: Can I paint MDF shelves?
Q: Can I paint MDF shelves?
Absolutely! MDF is a great surface to paint because you don't need to worry about sealing knots or differences in wood tones. We recommend using a primer first or opt for paint with a self-priming formula (Lick paint or Frenchic work well for MDF)
Q: How much weight can MDF shelves hold?
Q: How much weight can MDF shelves hold?
It depends on how they're supported, but our 18mm MDF can hold a substantial load when fitted with wall battens on three sides.
Q: How long will it take to receive my order?
Q: How long will it take to receive my order?
We are currently operating at 7 working days for custom orders. If you need your shelves sooner, please get in touch before ordering.
Q: How to get a good paint finish on MDF?
Q: How to get a good paint finish on MDF?
Before you start, make sure the shelf is completely dry and dust-free. Avoid using anything damp on raw MDF.
1. Apply your first coat and let is dry fully (follow your paint brand's recommended drying time).
2. Once dry, use 240-grit sandpaper to lightly sand the shelf. It's normal for the edges to look a bit fluffy after the first coat, just sand them smooth.
3. Apply your second coat.
4. If you're doing a third coat, we recommend sanding again with a higher grit paper for an ultra-smooth, glassy finish.
Q: Are these suitable for bathrooms and damp areas?
Q: Are these suitable for bathrooms and damp areas?
We don't recommend bare MDF in very damp spaces, but you can seal or paint it to add moisture protection.